How To Change Apollo Circular Bathroom Light

As a homeowner who enjoys DIY projects, I recently had the opportunity to change the Apollo circular bathroom light in my own home. Changing a bathroom light might seem intimidating, but it can be a straightforward and rewarding task with the right guidance. In this article, I will share my experience and provide a simple step-by-step guide on how to change an Apollo circular bathroom light.

Step 1: Safety First

Before you begin, ensure your safety by turning off the power supply to the bathroom. Locate the circuit breaker or fuse box and switch off the corresponding circuit that controls the bathroom lights. Use a voltage tester to double-check that there is no power running to the light fixture.

Step 2: Remove the Old Light

Carefully remove the old Apollo circular bathroom light from the ceiling. Most Apollo lights have a removable cover or lens held by screws or clips. Unscrew or unclip the cover and gently lower it, exposing the light bulb and wiring.

Step 3: Disconnect the Wiring

Next, disconnect the wiring that connects the old light fixture to the electrical supply. You should see a set of wires, usually black, white, and sometimes green or copper (for grounding). Loosen the wire nuts connecting the wires, and carefully separate the wires to disconnect the old fixture.

Step 4: Prepare the New Light Fixture

Take the new Apollo circular bathroom light and prepare it for installation. If necessary, assemble any components according to the manufacturer’s instructions. Ensure that you have the appropriate light bulbs for the fixture and are compatible with the wattage and type recommended by the manufacturer.

Step 5: Connect the Wiring

With the old light fixture removed, it’s time to connect the wiring for the new Apollo circular bathroom light. Match the corresponding wires together, connecting black to black, white to white, and green or copper to the grounding wire. Use wire nuts to secure the connections, making sure they are tight and properly insulated.

Step 6: Install the New Light Fixture

Once the wiring is securely connected, carefully lift the new Apollo circular bathroom light into place. Align it with the existing mounting bracket or use the provided mounting hardware, following the manufacturer’s instructions. Ensure the fixture is properly aligned and flush against the ceiling.

Step 7: Test and Secure

Before fully securing the new light fixture, testing it to ensure it is functioning properly is important. Turn the power supply back on at the circuit breaker or fuse box and test the light switch. If the new Apollo circular bathroom light illuminates as expected, turn the power off again and fully secure the fixture to the ceiling using the provided screws or mounting hardware.

Step 8: Finishing Touches

It’s time to complete the installation with the new Apollo circular bathroom light securely in place. Replace the cover or lens, ensuring it fits snugly and is aligned properly. Double-check that all screws or clips are tightened and that the fixture is stable and secure.

Congratulations! You have successfully changed the Apollo circular bathroom light. Now, turn the power back on, and enjoy your bathroom’s enhanced illumination and refreshed look.

How to open bathroom light cover to replace bulb? – Home

How to change your bathroom light bulb

How to change bathroom light by opening an Apollo circular light

Replacing a 2D Bathroom Light Bulb

How to change lamp to bathroom light (Disco 16W IP44)

Changing a fluorescent bathroom light bulb

How to open/ twist off the cover of some really stupid/ awkward

bathroom – How can I get the light cover off my fixture? – Home

Josef Hurka Napako Ceiling Lamp 1960s Etsy New Zealand

ETi 7″ Spin Light Installation video

APOLLO APOLLO Collection By LED Luks

How to change bathroom light by opening an Apollo circular light

Apollo Tile Floor and Wall Tile 5-Pack Gray and White 11-in x 12-in Polished Natural Stone Marble Penny Round Patterned Floor and Wall Tile

 

Related Posts: